Yealink T42S Quick Start-Up

minder Virtual PABX: Your Quick Startup
What is included in your T42G/S Package:
IP PHONE T42G/S
www.mindercloud.com.au
How to assemble your IP PHONE T42G/S:
1. Attached the stand, as shown below.
2. Connect your handset and optional
headset, as shown below.
NOTE: Headsets are purchased seperately.
3. Connect your network and power, as
shown below.
To Startup your IP PHONE T42G/S:
After the IP Phone is connected to the network and supplied
with power, it automatically begins the initialisation process.
After Startup, your IP Phone is ready to use (pre-configured).
NOTE: You have 2 Power Options - AC and PoE.
If PoE is provided, you do not need to connect the
Power Adapter.

Yealink T42S Specifications

General

Manual	Yes
Cables included	LAN (RJ-45)
Number of handles included	1 pc(s)
Lines quantity	12 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	12
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Voice codecs	CNG, G.711Mu, G.711a, G.723.1, G.726, G.729ab, VAD, iLBC
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Display diagonal	2.7 \
Display resolution	192 x 64 pixels
AC adapter input voltage	100 - 240 V
AC adapter output current	1.2 A
AC adapter output voltage	5 V
Dual-Tone Multi-Frequency (DTMF) modes	In-band, Out-of band, SIP info
Volume control	Digital
Number of programmable keys	6
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	2
Networking standards	IEEE 802.3af
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Supported network protocols	SIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, FTP/TFTP/HTTP/HTTPS

Weight and Dimensions

Depth	189 mm
Width	212 mm
Height	175 mm
Package depth	223 mm
Package width	246 mm
Package height	120 mm