Yeti ARC User Manual

ARC | OWNER’S MANUAL
7
KEEP YOUR YETI FRESH AND CLEAN
MAINTENANCE OVERVIEW
Following these guidelines will help maintain the performance of your bicycle and prevent
more serious problems from arising. It is important to remember that service intervals can
vary depending on climate, trail conditions and riding frequency. Servicing your bike requires
special knowledge and tools. If you are unsure about working on your own bicycle, contact
your authorized Yeti Dealer for more information on general bicycle maintenance.
TORQUE
Yeti strongly recommends using a torque wrench when assembling your frame. Torque
specications for individual parts on the ARC are listed below, as well as in the step by step
assembly instructions later in the manual. For general bicycle maintenance please consult the
torque specications of the component you are adjusting.
SCHEDULE
BEFORE EACH RIDE MONTHLY 3 MONTHS ANNUALLY
Clean and lube chain
•
Check tire pressure
•
Clean bike of mud and debris
•
Check brake function
•
Ensure all cable ends are covered with crimped cable end caps
•
Check rims for deformations or cracks
•
Check for loose bolts and tighten, if necessary
•
Check headset and tighten/loosen, if necessary
•
Check / replace brake pads
•
Check tires for wear
•
Check spoke tension, retention, if necessary
•
Check chain for wear, replace if necessary
•
Complete tune-up performed by an authorized Yeti Dealer
•
KEY TORQUE SPECS
PART # DESCRIPTION
TORQUE (Nm)
300030010 SHCS, M5 X 0.8, 16L
4-5
300030177 SCREW, FH, M4 X 0.7, 25L
2-3
300030174 SCREW, FH, M4 X 0.7, 15L
3
300030173 SCREW, FH, M4 X 0.7, 10L
2-3
300060080 SRAM UNIVERSAL HANGER
25

Yeti ARC Specifications

General

Brand	Yeti
Model	ARC
Category	Bicycle
Language	English