YOKOGAWA FX1006 User Manual

9
IM 04L21B01-02EN
FX System Configuration
The FX can be used to configure a system as shown below.
Referenced sections are of the FX1000 User’s Manual (IM 04L21B01-01EN.)
Ethernet
Sec. 3.5 to 3.8
Serial
communication*
RS-232, RS-422A/485
Transmitter power supply
*
PC
PLC
PC
FX
RecorderTemperature
controller
FAIL/status output
*
Sec. 2.9
Sec. 2.10
Signal input
Sec. 3.3
Pulse input
*
Sec. 3.10
Sec. 7.1
AC voltage and current
*
Sec. 3.12
Logarithmic DC voltage
*
Sec. 3.13
Sec. 2.11
*: Option
**: On FXs that have a CF card slot (suffix code -4.)
Communication Interface User’s Manual
(IM 04L21B01-17EN)
USB port*
Alarm output
*
CF card
**
USB flash memory
Keyboard
Remote input
*
Keys
Terminology
• Memory sample
The operation of recording measured data.
• Memory start
The operation of starting memory sampling.
• Memory stop
The operation of stopping memory sampling.
• Display data
The waveform data shown on the FX display. The data recorded at the sampling
interval for the displayed data.
• Event data
Measured data recorded at a sampling interval separate from that of the display data.
• Manual sample
The operation of recording measured data (instantaneous value) manually.
Introduction to Functions

YOKOGAWA FX1006 Specifications

General

Brand	YOKOGAWA
Model	FX1006
Category	Measuring Instruments
Language	English