036-21106-005 Rev. B (0505)
8 Unitary Products Group
1. For condensing unit only. Does not include effect of evaporator motor power or heat.
2. Performance based on 15° superheat and 15° sub-cooling at condensing unit.
a. Increase capacity 1% for each 2° increase in sub-cooling.
b. Decrease capacity 1% for each 2° decrease in sub-cooling.
3. Sub-cooling in excess of 20° may result in excessively high condensing temperature with air on condenser above 115°. Maximum
recommended condensing temperature is 140°F.
ACCESSORIES
Refer to Price Manual for specific model numbers.
Hard Start Kit - Provides increased starting torque for areas
with low voltage.
Compressor Blanket - Designed to further reduce the nor-
mal compressor operating sound. Refer to price pages for
specific match-ups.
Off Cycle Timer Delay - Provides a 5-minute off cycle to pre-
vent rapid recycling of the compressor.
Room Thermostats - A wide selection of compatible thermo-
sets are available to provide optimum performance and fea-
tures for any installation.
1 Heat Stage only, manual, mechanical thermostat. Add sub-
base for 1H/1C.
1H/1C, manual change-over electronic non-programmable
thermostat.
1H/1C, auto/manual changeover, electronic programmable,
deluxe 7-day, thermostat.
1H/1C, auto/manual changeover, electronic programmable.
* For the most current accessory information, refer to the
price book or consult factory.
SOUND POWER RATINGS
*Rated in accordance with ARI Standard 270.
COOLING PERFORMANCE
MODEL
SUCT. T/P
@ COMPR.
AIR TEMP ON CONDENSER
MODEL
SUCT. T/P
@ COMPR.
AIR TEMP ON CONDENSER
75°F95°F115°F75°F95°F115°F
TEMP. PSIG MBH KW MBH KW MBH KW TEMP. PSIG MBH KW MBH KW MBH KW
AC018X1222
35 61.5 17.19 1.44 13.89 1.59 11.63 1.70
AC042X1221
35 61.5 35.94 3.12 31.92 3.76 27.86 4.54
40 68.5 18.77 1.45 15.80 1.63 13.53 1.77 40 68.5 39.29 3.15 35.11 3.77 30.80 4.55
45 76.0 20.48 1.47 17.70 1.66 15.04 1.83 45 76.0 42.48 3.21 38.17 3.84 33.70 4.63
50 84.0 21.99 1.48 19.60 1.70 16.81 1.89 50 84.0 45.62 3.23 41.40 3.92 36.56 4.39
AC024X1222
35 61.5 20.81 1.81 16.82 2.00 14.07 2.14
AC048X1222
35 61.5 40.62 3.39 36.09 4.08 31.50 4.91
40 68.5 22.73 1.83 19.13 2.05 16.37 2.23 40 68.5 44.42 3.41 39.69 4.09 34.83 4.94
45 76.0 24.80 1.85 21.43 2.09 18.20 2.31 45 76.0 48.02 3.47 43.16 4.16 38.10 5.02
50 84.0 26.63 1.86 23.73 2.14 20.36 2.37 50 84.0 51.58 3.50 46.81 4.25 41.33 4.76
AC030X1222
35 61.5 26.48 2.34 21.42 2.59 17.91 2.77
AC060X1223
35 61.5 50.26 4.42 44.64 5.32 38.97 6.42
40 68.5 28.94 2.36 24.34 2.65 20.84 2.92 40 68.5 54.95 4.46 49.10 5.33 43.08 6.44
45 76.0 31.56 2.39 27.07 2.71 23.17 2.96 45 76.0 59.41 4.54 53.38 5.43 47.13 6.55
50 84.0 33.89 2.40 30.20 2.77 25.92 3.07 50 84.0 63.81 4.58 57.90 5.55 51.13 6.22
AC036X1222
35 61.5 29.38 2.76 23.75 3.06 19.87 3.26
40 68.5 32.09 2.78 27.00 3.13 23.12 3.40
45 76.0 35.01 2.81 30.25 3.19 25.70 3.51
50 84.0 37.59 2.83 33.50 3.26 28.74 3.62
UNIT MODEL (dBA)*
018 75
024 80
030 76
036 79
042 78
048 80
060 76