York NE090 User Manual

679948-YTG-A-0111
20 Unitary Products Group
TABLE 29: RETURN AIR GRILL
TABLE 30: BASE ACCESSORY
FIGURE 12 - ACCESSORY DIMENSIONS
TABLE 28: ELECTRIC HEATER DIMENSIONS - NE090, NE/NF120 & NE180
Heater
Model
Nom
.
kW
Unit
Model
Heater Dimensions (inches)
ABCDEFGHKLM
2HS04501025, 46, 58
2HS04501625, 46, 58
2HS04502625, 46, 58
2HS04503625, 46, 58
10
16
26
36
090
120
180
27-1/4 25-1/4 14-1/4 1 4 1/2 5-1/2 1-1/2 1-1/2 22-1/4 19-1/4
2HS04507225, 46, 58 72 180 28-11/16 28-11/16 21-3/4 1 5-1/4 3/4 6-3/8 2-1/4 2-1/2 22-3/8 19-1/4
HEATER
ELEMENT
CHAMBER
3/4
A
C
1
D
L
E
F
M
G
H
K
B
ACCESS OPENING FOR POWER SUPPLY WIRING
1/2
W
IRING HARNESS LOCATION
This opening in the bottom of the heater
control box is used for the wiring harness
t
hat connects the heater accessory to the
basic unit. It is provided with a squeeze
connector for securing the wiring harness,
and its location corresponds to the loca-
t
ion of the 1-23/32" knockout in the top
panel of the basic unit.
CONTROL BOX
ACCESS PANEL
10KW THRU 36KW - Add a 1-1/4" conduit fitting
to the 1-23/32" hole for wire sizes up through
#1 AWG. Remove the knockout ring and add
a
1-1/2" conduit fitting to the 1-31/32" hole for
wire sizes up through #0 AWG.
KW THRU 36KW - Add a 1-1/4" conduit fitting
to the 1-23/32" hole for wire sizes up through
#1 AWG. Remove the knockout ring and add a
2 " conduit fitting to the 2-1/2" hole for wire sizes
up through #0000 AWG.
72
FIGURE 13 - RETURN AIR GRILL
Grill Model Unit Model
Grill Dimensions (Inches)
AB
1RG0451
090
120
52 25
1RG0452 180 60-3/4 31
1RG0405 240 89-1/2 29-1/2
FIGURE 14 - BASE ACCESSORY
Base Model Unit Model
Base Dimensions (Inches)
ABC
1BS0451
090
120
52 25-1/8 20
1BS0452 180 60-3/4 31-5/8 24
1BS0405 240 89-1/2 30-3/4 23-3/8

York NE090 Specifications

General

Brand	York
Model	NE090
Category	Blower
Language	English