ENGLISH
5
AUTO / COOL
MANUAL OPERATION
1 Open and lift the front panel up to an angle at which it
remains fi xed with a clicking sound.
2 Press the button until the AUTO indicator is lit, the unit
will work in forced AUTO mode.
3 Close the panel fi rmly to its original position.
Manual operation can be used temporarily in case you can not fi nd the remote controller or its batteries are
exhausted.
HOW THE AIR CONDITIONER WORKS
■ AUTOMATIC OPERATION
• When you set the air conditioner in AUTO mode, it will
automatically select cooling, heating (cooling/heating
models only), or fan only operation depending on
what temperature you have selected and the room
temperature.
• The air conditioner will control room temperature
automatically around the temperature point set by you.
• If the AUTO mode is uncomfortable, you can select desired
conditions manually.
■ SLEEP OPERATION
• When you push SLEEP button during cooling, heating
(cooling only type without), or AUTO operation, the
air conditioner will automatically increase (cooling) or
decrease (heating) 1°C per hour. The set temperature
will be steady 2 hours later.
• The fan speed will be automatically controlled.
■ DRYING OPERATION
• The dry mode will automatically select the drying operation
based on the difference between the set temperature and
the actual room temperature.
• The temperature is regulated while dehumidifying by repeating
turning on and off of the cooling operation or fan only. The
fan is low.
Manual control button
Panel
CAUTIONS
1
1
1
1
Press Sleep button
Set
Temperature
1 hour 1 hour
Cooling
Press Sleep button
Set
Temperature
1 hour 1 hour
Heating
DRYING operation
Room
temperature
Time
set temperature
Cooling
Fan only
Cooling
Fan only
Cooling
• Once you push the manual button, the operation mode
is shifted in an order as: AUTO, COOL, OFF.
• Push the button twice, the unit will operate in forced COOL
mode. This is used for testing purposes only.
• Third press will stop the operation and turn off the air
conditioner operation.
• To restore the remote controller operation, use the remote
controller directly.
EN
J277-EN.indd 5J277-EN.indd 5 26.12.2005 15:15:15 Uhr26.12.2005 15:15:15 Uhr
To Next Page
Loading...
Need help?
General
