JOHNSON CONTROLS
36
FORM 150.67-NM1
ISSUE DATE: 4/28/2017
SECTION 3 – HANDLING AND STORAGE
UNIT RIGGING
Lifting Instructions are placed on a label on the chiller
and on the shipping bag.
Forks must extend beyond the width of the unit for proper
lift. The thickness of the fork blade must be smaller then
the opening of the lifting hole. Improper fork positioning
could result in damage to the unit.
FIGURE 7 - UNIT RIGGING/LIFTING (YCAL0019 – 0033 SINGLE CIRCUIT MODELS ONLY)
Lifting Weights
For details of weights and weight distribution, refer to
the data shipped in the chiller information packet and
unit nameplate.
48.00 in.
To Next Page
Loading...
Need help?
General
