To Next Page

To Previous Page

BOOMBOX - 60W weatherproof Bluetooth

/Mic/FM/Guitar speaker

Page 6

English

5 - Using your BOOMBOX

5.1 - Connection and activation

5.2 - Charging the battery

5.3 - Bluetooth pairing

Manual Bluetooth pairing

• Connect the supplied AC cable to the

speaker.

• Plug the AC cord into the wall outlet.

• Use the power button to activate your BOOMBOX, the Power LED

indicator will light red.

• Press and hold SRC (9) until the light panel flashes and your

BOOMBOX plays an audio signal.

• Your BOOMBOX restores its last mode used upon activation.

• By connecting AC power, battery will start charging.

• To check battery levels, press the battery icon (5).

Charge battery about 6 hours without using

it before you start using the unit for the

first time.

• Please make sure your Bluetooth device and your speaker

are in range (approximately 3 feet).

• Select the Bluetooth source via the Source selection button

(9).

• The Blue display will light.

• Please make sure you have activated the Bluetooth function

of your device.

• Enter search mode (via your device). Once detected, your

speaker will appear under the name "BOOMBOX".

• Once connected, a vocal message will say "Connected".

• The Blue display will stop flashing and remain lit.

YOURS BOOMBOX User Manual

Questions and Answers: