The instruction shows how to charge and maintain the battery, some safety notices and the specification. Please
use the battery properly according to this instruction to prolong the battery life and its performance.
4
.
1
B
a
t t
e
r
y
P
a
r
a
m
e
t
e
r
s
●
Open the charging port cover, Make sure the charging port is clean and dry.
●
Connect the charger with the battery and the other end with power(100V-240V;50/60Hz), make sure the charging
indicator is on.
●
When the indicator light on the charger changes, indicating that the charging process is normal, otherwise check if the line
connection is good.
●
When the indicator on the charger has color change, it indicates that the battery has been filled to 99%, Please stop
charging; long time over charge will affect the battery life.
4
.
2
B
a
t t
e
r
y
S
a
f
e
t
y
D
o no
t
c
on
t
i
nu e
t
o u
s
e
t
he ba
t t
e
r
y
w
hen
t
he
f
o
l l
o
w
i
ng
c
ond
i
t
i
on
s
o
cc
u
r
:
The battery of the electric scooter should be used only with local law. Only for professionals to disassemble and maintain
the battery.
Odor or excessive heat; leak any substance; do not touch anything leaking from the battery.
Do not let children and animals touch the battery. Must unplug the charger before installing the battery or riding. In the
case of charging, it is very dangerous to do anything related to electric vehicles.
If you want the electric scooter to run most efficiently, the battery must be charged and used within the temperature range
indicated in the battery specifications.
Lithium batteries are considered dangerous and require local law to allow transportation.
The battery contains dangerous substances. Please do not open the battery . Do not insert anything into the battery.
It is forbidden to charge a lithium battery that has been over-discharged. A battery that has been over-discharged has
a safety hazard and can only be scrapped.
T
i
p
:
W
hen
t
he
i
n
t
e
r
na
l
t
e
m
pe
r
a
t
u
r
e o
f t
he ba
t t
e
r
y
e
xc
eed
s
45
°
C
, t
he ba
t t
e
r
y
i
s
p
r
o
t
e
c
t
ed
.
Do not charge the battery at high temperature (45 ° C) or Charge the battery in a high temperature (40 ° C) environment.
Only use the original charging equipment to charge the electric scooter.
13
T
i
p
s
:
Open the silicone charging port, plug the charger DC plug into the battery charging port; plug the power cord into the
charger, then connect the other port to the socket (100V-240V; 50/60Hz),
and confirm the charger indicator is on normally
C
o
v
e
r
t
he
c
ha
r
g
i
ng po
r
t
w
i
t
h
t
he an
t
i
-
du
s
t
c
ap
i
n
c
a
s
e
s
o
m
e
m
e
t
a
l
m
a
y
t
ou
c
h
t
he
c
ha
r
g
i
ng po
r
t
an d b
r
i
ng
s
ho
r
t
-
c
i
r
c
u
i
t
a
f t
e
r
c
ha
r
g
i
ng
f
i
n
i
s
hed
.
To Next Page
Loading...
Need help?
General
