Z-CAM E2-S6 User Manual

2.5. Exposure
 Flicker Reduction
：
60Hz / 50Hz. It’s set to eliminate light flicking caused by the
frequency of the electricity, which is 60Hz in North America and some parts of Asia.
(South Korea
，
Philippines
，
Taiwan of China), And 50Hz for China mainland, other
countries and regions.
 EV: -3.0 ~ 3.0
 Shutter Speed / Shutter Angle: This setting depends on whether “Shutter Speed” or
“Shutter Angle” is selected in 2.5 Exposure - Shutter Operation
Shutter Speed: Auto / Manual（1~1/8000”）*
Shutter Angle: Auto / Manual（1°~360°）
* The minimum shutter speed “1” is available only when" variable frame rate "is set to
“1”.
 Aperture: It shows the range of aperture of the lens, and can be adjusted manually if
it’s an electrical lens. Only for lenses with electronic contacts. If the lens used is a
purely mechanical without electronic contacts, the aperture value is not shown here.
 ISO: ISO optional values depend on the setting in ISO control. The native ISO value
varies from different models.
ISO Control ISO
Fine 400 ~ 125000
Dual Native
ISO
ZCAME2-F6:400/2500
Z CAM E2-S6 & E2-F8: 400 / 1250

Z-CAM E2-S6 Specifications

General

Brand	Z-CAM
Model	E2-S6
Category	Digital Camera
Language	English