Z-CAM E2-S6 User Manual

 If water accidently invades the camera, please shut it down, take off the battery (if
any) and the memory card, and make the camera dry within 24 hours.
 As the camera’s heating range is 0-40°C, please do not place or use the camera in
an environment where the temperature is lower than 0°C or higher than 40°C.
 Please do not let the camera and the already installed lens face the sun.
 Please do not touch the image sensor while removing the lens.
 Please do not blow off any dust on the sensor with a dust blower.
 Please do not use any detergent containing organic solvent to clean the camera body
and the lens.
 Please use soft lens cloth to clean the camera body regularly.
 Please do not disassemble the camera by yourself.
 Please do not place the camera in a darkroom, a lab or other places where corrosive
chemicals are stored.
Adaptor information
：
Adaptor
Brand Name: MASS POWER
Model No.: NBS65A120500M2
Input:100-240V, 1.5A, 50/60Hz
Output:12V, 5A
Operating Frequency Range&Power:
a. 5.15~5.25GHz,5.725~5.85GHz
b. 5.15~5.25GHz, only for indoor use
Max Transmitter Power：13.79dBm
This product can be used across EU member states.
RF exposure information: The Maximum Permissible Exposure (MPE) level has been
calculated based on a distance of d=20 cm between the device and the human body. To
maintain compliance with RF exposure requirement, use product that maintain a 20cm
distance between the device and human body. After evaluation,It satisfy RF exposure
compliance.

Z-CAM E2-S6 Specifications

General

Brand	Z-CAM
Model	E2-S6
Category	Digital Camera
Language	English