Zanussi ZITN844K User Manual

For most of the hoods the
remote system is originally
deactivated. Activate it before
you use the function. For more
information refer to hood user
manual.
Operating the function automatically
To operate the function automatically set the
automatic mode to H1 – H6. The hob is
originally set to H5. The hood reacts
whenever you operate the hob. The hob
recognizes temperature of the cookware
automatically and adjusts the speed of the
fan.
Automatic modes
Automatic
light
Boiling
1)
Frying
2)
Mode H0 Off Off Off
Mode H1 On Off Off
Mode
H2
3)
On Fan speed
1
Fan speed
1
Mode H3 On Off Fan speed
1
Mode H4 On Fan speed
1
Fan speed
1
Mode H5 On Fan speed
1
Fan speed
2
Mode H6 On Fan speed
2
Fan speed
3
1)
The hob detects the boiling process and acti‐
vates fan speed in accordance with automatic
mode.
2)
The hob detects the frying process and acti‐
vates fan speed in accordance with automatic
mode.
3)
This mode activates the fan and the light and
does not rely on the temperature.
Changing the automatic mode
1. Deactivate the appliance.
2. Touch for 3 seconds. The display
comes on and goes off.
3. Touch for 3 seconds.
4. Touch a few times until comes on.
5. Touch of the Timer to select an
automatic mode.
To operate the hood directly on
the hood panel deactivate the
automatic mode of the function.
When you finish cooking and
deactivate the hob, the hood fan
may still operate for a certain
period of time. After that time the
system deactivates the fan
automatically and prevents you
from accidental activation of the
fan for the next 30 seconds.
Operating the fan speed manually
You can also operate the function manually.
To do that touch when the hob is active.
This deactivates automatic operation of the
function and allows you to change the fan
speed manually. When you press you
raise the fan speed by one. When you reach
an intensive level and press again you will
set fan speed to 0 which deactivates the
hood fan. To start the fan again with fan
speed 1 touch .
To activate automatic operation
of the function, deactivate the
hob and activate it again.
Activating the light
You can set the hob to activate the light
automatically whenever you activate the hob.
To do so set the automatic mode to H1 – H6.
The light on the hood
deactivates 2 minutes after
deactivating the hob.
6. HINTS AND TIPS
WARNING!
Refer to Safety chapters.
ENGLISH 49

Zanussi ZITN844K Specifications

General

Hob type	Zone induction hob
Product color	Black
Hob width size	78 cm
Top surface type	Ceramic
Appliance placement	Built-in
Cooking zone 1 type	Large
Cooking zone 3 boost	3200 W
Cooking zone 4 power	2300 W
Cooking zone 1 position	Left rear
Cooking zone 2 position	Left front
Cooking zone 3 position	Right rear
Cooking zone 4 position	Right front
Number of cooking zones	4 zone(s)
Regular cooking zone shape	Round
Cooking zone 4 power source	Electric
Number of gas cooking zones	0 zone(s)
Regular cooking zone diameter	210 mm
Boost function	Yes
Number of boosters	2
Number of power levels	-
Timer type	Digital
Control type	Touch
Timer duration	99 min
Control position	Top front
Connected load (gas)	- W

Weight and Dimensions

Depth	520 mm
Width	780 mm
Height	- mm
Cord length	1.5 m
Installation compartment depth	490 mm
Installation compartment width	750 mm
Installation compartment height	44 mm