Zenner zelsius C5-CMF User Manual

4
the number of the EC type-examination cer-
ticate DE-12-MI004-PTB010 complies with the
requirements of the EC directives 2004/22/EC
(Measuring instruments directive) and 89/336/
EEC (electro-magnetic compatibility).
Electro-magnetic interference
zelsius
®
C5-CMF fulls the national and interna-
tional requirements for interference resistance.
To avoid malfunctions due to other interferences,
do not install uorescent lamps, switch cabinets
or electric devices such as motors or pumps in
the immediate vicinity of the meter (minimum
distance 1 m). Cables leaving the meter should
not be laid parallel to live cables (230V) (mini-
mum distance 0.2 m).
Care instructions
Clean plastic surfaces with a damp cloth only.
Do not use any scouring or aggressive cleaning
agents! The device is maintenance-free during
the service life. Repairs can only be made by the
manufacturer.
The most up-to-date information about this prod-
uct and of our installation notice can be found at
www.zenner.com
Pulse inputs and outputs
(optional)
By meters with pulse inputs, the pulse value can
be called up in the display (see the display over-
view, Level 4).
The pulse value of the outputs is permanently set
and corresponds with the last position of the as-
sociated display value.
Example:
Output 1 = energy output
Energy display = XXXXX.XXX
Last position = 0.001 MWh = 1 kWh
Output pulse = 1 KWh
In 1…3 Out 1…3
Input
GNDGND
Output
In 1…3 Out 1…3
Input
GN
DG
ND
Output
Colour connection signification
white I/O 1 In-/Output 1
yellow I/O 2 In-/Output 2
green I/O 3 In-/Output 3
brown GND
common ground for
I/O 1-3
Technical data M-Bus
Cable length 1,5 m
Cable D=3.8m, 2-core

Zenner zelsius C5-CMF Specifications

General

Brand	Zenner
Model	zelsius C5-CMF
Category	Measuring Instruments
Language	English