Need help?Do you have a question about the Zenoah G5000 and is the answer not in the manual?
Power Unit| displacement | 49.3 cm3 |
|---|---|
| fuel tank capacity | 550 cm3 |
| oil tank capacity | 260 cm3 |
Cutting Head| guide bar size | 14 (350), 16 (400), 18 (450) in. (mm) |
|---|---|
| saw chain pitch | 0.325 (8.26) in. (mm) |
| saw chain gauge | 0.058 (1.47) in. (mm) |
Dimensions and Weight| dimensions | 420 x 235 x 270 mm |
|---|---|
| dry weight | 5.1 kg |
Instructions for initiating the engine's operation, including fuel and oil checks and switch settings.
Procedure for verifying the chain oil level and its distribution during operation for lubrication.
Fine-tuning the engine's carburetor for optimal performance under varying operating conditions.
Procedure for safely shutting down the engine after use, including idling.
Explanation of the mechanism designed to prevent carburetor icing in cold, humid conditions.
Instructions for changing the saw's operating mode, including anti-freeze and normal settings.
Safety measures and checks to prevent dangerous kickback during operation.
Step-by-step guide for safely felling trees, covering notch and felling cuts.
Techniques for cutting logs and branches, emphasizing safety and proper footing.
Essential cleaning and inspection tasks to perform after every operation.
Key components requiring regular inspection and service for long-term reliability.
Instructions for sharpening and maintaining the saw chain cutters and depth gauges.
Procedures for inspecting and maintaining the guide bar, including wear and oiling ports.
Diagnosing and resolving issues related to the engine failing to start.
Addressing problems with poor engine performance, acceleration, or idling.
Steps to identify and fix issues where chain oil is not being delivered correctly.
To Next Page
