19
PRW24C32BG Use, Care, and Installation Guide
ZEPHYRONLINE.COM
If the unit is unplugged, power lost, or turned o, you must wait 3 to 5 minutes before restarting the
unit. If you attempt to restart before this time delay, the appliance may not start and will not keep the
last set temperature.
Using the Control Panel
This wine cooler has a temperature range from 40ºF-65ºF.
Power Button
Press and hold this button for three seconds to power your unit on or o. While the unit is on,
the R “Compressor Running” light may illuminate to indicate the internal compressor is active.
Increase Temperature
Press this button to increase the temperature by one (1) degree increments. 65ºF is the highest
available temperature on this unit.
Decrease Temperature
Press this button to increase the temperature by one (1) degree increments. 40ºF is the lowest
available temperature on this unit.
Interior Light
Press this button to cycle through the dierent internal light settings. There are three light
settings: Cloud White, Deep Blue and Amber.
ºF/ºC Selector
Hold the Increase and Decrease Temperature buttons at the same time to switch the display
temperature.
NOTE: The wine cooler is equipped with a temperature memory function. If power is suddenly lost, the
previous set temperature will be saved, and the cooler will return to this setting once power is
restored.
Operating Your Appliance
To Next Page
Loading...
Need help?
General
