The
appliance
does not
operate.
⚫ Ensure the appliance is
plugged in and the power
outlet has power.
⚫ The appliance is turned off.
⚫ The circuit breaker tripped
or a blown fuse.
⚫ Replace the broken fuse or
reset the breaker.
⚫ Sabbath mode may be
enabled.
⚫ See Operation page and verify
Sabbath mode is disabled.
The
appliance is
not cold
enough.
⚫ Check the temperature
control setting.
⚫ Adjust the set temperature.
⚫ External environment may
require a higher setting.
⚫ Keep the appliance away from
sunshine or other heat sources
.
⚫ Demonstration mode may
be enabled.
⚫ See Operation page and verify
Demonstration mode is
disabled.
⚫ The door is opened too
frequently or for long
periods of time.
⚫ Close the door tightly and do
not open the door too
frequently or for a long period
of time.
⚫ The door gasket does not
seal properly.
⚫ Ensure the door gasket is not
loose.
⚫ The cooler does not have
sufficient ventilation.
⚫ Read and follow the
“installation clearance
requirements” section.
⚫ The cooler has restricted
air flow due to too much
storage.
⚫ Open space in the cabinet to
allow air flow.
Turns on and
off
frequently.
⚫ The room temperature is
hotter than normal.
⚫ Run the refrigerator at the
appropriate ambient
temperature.
⚫ The door gasket is not
sealing properly.
⚫ Make sure the door gasket is
properly sealed.
⚫ The door is open too often.
⚫ Minimize the number of times
the door is opened.
⚫ The cooler does not have
the suggested ventilation.
⚫ Read and follow the
‘installation clearance
requirements” section.
⚫ The door is not closed
completely.
⚫ Make sure the door is
completely closed.
To Next Page
Loading...
Need help?
General
