Cleaning Tip:
Fill residue containers ¼ full with water before cleaning or during regular use. This will
help to prevent residue from drying and tacking on cup surface.
With nozzle on ‘spray’, squirt ‘409’ detergent
directly onto blower blades 30-35 times.
Repeat with second blower. Allow self
cleaning to complete in 5 minutes.
(If desired,
spray water to rinse off detergent after completion of the
cleaning cycle and run for another few minutes)
Remove clean cups. Clean w/ mild detergent
or in dishwasher under normal wash cycle.
CLEANING & MAINTAINANCE
15
Replacing Light Bulbs
Light bulbs (included) are 35W halogen (TYPE
HR16 )bulbs.
Remove by unscrewing light bulb counter
clockwise, and replace with type HR16-35W
halogen bulbs.
Clean all surface residue with ‘409’ or mild
detergent and wipe with cotton cloth.
Stainless steel surface could further be clean
and polished with any stainless steel polish or
glass cleaners.
Surface Maintanance
To Next Page
Loading...
Need help?
General
