Instructions for battery usage
First Charge
It is important to fully charge the battery before your first use of the scooter.
Features of the battery
Your scooter’s battery comes with these built-in features:
1. Balanced charging protection: During charging, the battery automatically balances the
voltage among the internal cells to protect each cell.
2. Over-charging protection: The battery stops charging automatically when full to protect
against damage.
3. Over current protection: The battery automatically stops charging if the voltage is higher than
prescribed voltage to protect the battery.
4. Over discharging protection: The battery automatically stops discharging when its voltage
drops below 44V to protect the battery.
5. Short-circuit protection: the battery automatically stops output in the case of a short-circuit.
6. Auto sleep: The battery automatically enters sleep mode if there is no load for 20 minutes to
conserve power.
How to charge
1. Ensure that scooter is TURNED OFF. Connect external power charger to scooter.
2. Connect charger to electrical outlet, then turn on the power of electrical outlet.
3. Do not charge the batteries in temperatures below 5 ° C or above 40 °C. The battery may stop
the charging process.
18
To Next Page
Loading...
Need help?
General
