Zero FX User Manual

General Maintenance
5.20
2. Disconnect the headlight bulb connector (B).
3. Unhook the headlight bulb spring clip (C) by pushing
down and to the side.
4. Lift up on the spring clip and remove the headlight bulb.
WARNING! Do not touch the glass portion of the headlight
bulb. Keep the headlight bulb free of contaminants. Oil
from your fingers or contaminants will shorten the life of
the bulb. Thoroughly clean any fingerprints or
contaminants from the bulb using a clean cloth moistened
with alcohol.
5. Install the headlight bulb into the lens.
6. Install the headlight spring clip.
7. Connect the headlight connector and install the
headlight into the housing.
8. Install the headlight trim ring with gasket and install the
trim ring screws.
B
C
Zero Owner's Manual (X, MX and XU).book Page 20 Monday, April 29, 2013 3:30 PM

Zero FX Specifications

General

Brand	Zero
Model	FX
Category	Scooter
Language	English