.Vertical Balance of the Tilt Axis
Make the lens face up, loosen the level mount lock
screw①. Push the whole level mount to move forward or
backward②. Push until the camera can stay still with the
lens facing up (i.e.the camera stays still and vertical to the
ground) ③. Complete this step by tightening up the screw④.
④
①
②
⑤
EN
zhiyun-tech.com
Quick start guide
3.Roll Axis Balance
Unlock the roll axis① and loosen the quick release plate
leveling base latch②. Push the camera to move left or
right③ until the camera can stay still and horizontal to
the ground④. Complete this step by tightening up the
latch⑤.
③
④
③
②
①
To Next Page
Loading...
Need help?
General
