Figure 5. Squeeze the hinge pin down which will lock it into place. Tighten
the lever until it is securely locked into place.
Figure 6. Install the seat which is designed to be used with either the
left or right leg.
Figure 7. Insert the seat at your desired height locking it into place with
the seat post pin.
Figure 8. Tighten the clamp lever to secure the seat into place.
Figure 9. Insert the handlebar into the steering column adjusting the
height until comfortable. We recommend setting the handlebar at
approximately waist height. Ensure that the handlebar is facing forward
with the brakes facing towards you. Tighten the height locking screw.
To Next Page
Loading...
Need help?
General
