88
2. The phone will prompt you to place the device you
are connecting to in discoverable mode. Press the
Center Select Key [OK] to continue.
3. A list of visible Bluetooth devices in range will be
shown. Select the Bluetooth device to be paired to
and press the Center Select Key [PAIR].
4. The phone will prompt you for the passkey (if
matching codes are not found). Enter the passkey
and press the Center Select Key [SET].
5. Select Always Ask or Always Connect and press
the Center Select Key [OK] to set the incoming
security for the device.
6. Once paired, you will see the device in the Bluetooth
menu.
7. Select a paired device and press the Right Soft Key
[Options] to access the following options.
• Remove Device: Remove the paired device from
the list.
• Remove All Devices: Remove all paired
devices.
• Rename Device: Rename the paired device.
• Incoming Security: Set the incoming security
(Always Ask or Always connect) for the paired
device.
• Service Discovery: View the Bluetooth services
supported by the paired device.
• Device Info: View the information of the paired
device.
To Next Page
Loading...
Need help?
General
