94
¾ Least Sensitive: The voice commands
system will decrease the sensitivity to filter
out more potential matches.
• Adaptation: Adaptation is the process of
optimizing the voice recognition software to
your voice. Adaptation requires recording your
voice, which is then used to customize the voice
recognition system.
1. Select Adapt Voice and press the Center
Select Key [OK].
2. Press the Center Select Key [OK] to begin.
Adaptation will take a few minutes, and you
should be in a quiet environment.
3. Follow the on-screen prompts to complete
the adaptation.
• Prompts: Select settings for the voice
commands prompts.
¾ Mode: Select the level of audio guidance
provided by the system from Prompts,
Readout + Alerts, Readout, or Tones
Only.
¾ Audio playback: Choose whether the audio
is played through the Speakerphone or
Earpiece.
¾ Timeout: Control how long the system
listens for your command before timing out.
Choose 5 seconds or 10 seconds.
• About: View the information about Voice
Commands.
To Next Page
Loading...
Need help?
General
