Setting Up Your Phone
The nano-SIM card(s) can be installed or removed
while the phone is turned on.
Power off your phone before removing or replacing
the battery.
WARNING!
To avoid damage to the phone, do not use any other
kind of SIM cards, or any non-standard nano-SIM
card cut from a SIM card. You can get a standard
nano-SIM card from your service provider.
1. Place your finger into the slot at the lower left side
of the back cover, and gently lift and remove the
cover.
2. Install nano-SIM card into the card slot as the
following picture shown.
Single-SIM model Dual-SIM model
To Next Page
Loading...
Need help?
General
