4
Setting Up Your Phone
The nano-SIM card can be installed or removed while the
phone is turned on.
Power off your phone before removing or replacing the
battery.
WARNING!
To avoid damage to the phone, do not use any other kind
of SIM cards, or any non-standard nano-SIM card cut
from a SIM card. You can get a standard nano-SIM card
from your service provider.
1. Place your finger into the slot at the bottom of the
back cover, and gently lift and remove the cover.
2. Install the nano-SIM card and the microSDXC card
(optional) as shown.
3. Insert the battery,making sure the connectors
align.Gently push down on the battery until it clicks
into place.
To Next Page
Need help?
General
