Zte BLADE V9 User Manual

6
Charging the Phone
Your phone’s battery should have enough power for the phone
to turn on, find a signal, and make a few calls. You should fully
charge the battery as soon as possible.
WARNING!
Use only ZTE-approved chargers and USB cables. The use of
unapproved accessories could damage your phone or cause
the battery to explode.
WARNING!
Do not remove the back cover. The battery is not
removable. Removal may cause fire or explosion.
NOTE:
If the battery is extremely low, you may be unable to power on
the phone even when it is being charged. In this case, try
again after charging the phone for at least 20 minutes. Contact
the customer service if you still cannot power on the phone
after prolonged charging.
NOTE:
If the screen freezes or takes too long to respond, try pressing
and holding the Power key for about 10 seconds to restart the
phone.

Zte BLADE V9 Specifications

General

Display Size	5.7 inches
Display Type	IPS LCD
Resolution	1080 x 2160 pixels
Processor	Qualcomm Snapdragon 450
CPU	Octa-core 1.8 GHz Cortex-A53
GPU	Adreno 506
RAM	3GB / 4GB
Internal Storage	32GB / 64GB
Expandable Storage	microSD, up to 256 GB
Rear Camera	16 MP + 5 MP
Rear Camera Features	Dual-LED dual-tone flash, HDR, panorama
Front Camera	13 MP
Battery Capacity	3200 mAh
Operating System	Android 8.0 (Oreo)
SIM	Single SIM (Nano-SIM) or Dual SIM (Nano-SIM, dual stand-by)
Dimensions	151.4 x 70.6 x 7.5 mm (5.96 x 2.78 x 0.30 in)
Colors	Black, Gold, Blue, Gray
Weight	140 g