ZTE MF58
18
2.1.2 T-FLASH
The T-FLASH card is used to save a recorded video file. The process of inserting and
removing the T-flash card is the same as for the SIM/USIM card.
Note:
When the T-FLASH card is inserted, the metallic surface is upward, which is different from
how to insert the SIM/USIM card.
2.1.3 Battery
Your Mobile Cam is equipped with a Lithium ion battery. You do not need to purchase a new
one. You should, however, charge the battery after purchase, as the stored charge may be
insufficient to power on the Mobile Cam. The battery can be recharged at any time and will
not affect operation.
The Mobile Cam will be powered off automatically when the battery is low. Battery
performance will deteriorate as the battery’s lifecycle draws to an end. When this happens,
you should contact the manufacturer/repair centre to purchase a replacement.
Do not disassemble the Mobile Cam to change the battery.
This Manual: http://www.manuallib.com/file/2593400
To Next Page
Loading...
Need help?
General