Zte MF65 Getting Started

11
NOTE: If the system does not automatically launch instal-
lation, you can run the installation program in the My Com-
puter/ZTEMODEM path.
3. Wait until the client is connected to your device suc-
cessfully.
Accessing the Internet
After a client is successfully connected to your device, you
can access the Internet in Automatic or Manual mode.
The default mode is Automatic.
Mode Operation
Automatic
Your device is automatically connected to the
Internet, and you can surf the Internet through
the client.
Manual
1. Log in to the web GUI conguration page.
2. Select Settings > Network Settings > Di-
al-up Settings > WAN Connection Mode
> Manual, and then click Apply to conrm
your conguration.
3. Click Home and then click Connect to ac-
cess the Internet.

Zte MF65 Specifications

General

Type	Mobile
Networking features	HSDPA/3G UMTS/GSM
DC-in jack	Yes
Internal	No
Number of WLAN connections (max)	5
Maximum data transfer rate	21.6 Mbit/s
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n

Weight and Dimensions

Weight	75 g
Dimensions (WxDxH)	50 x 13.7 x 102 mm