6
Installing the nano-SIM Card, Battery,
and microSD Card
The microSD card can be installed or removed while the phone
is turned on. You need to unmount the microSD card before
removing it.
WARNING!
To avoid damage to the phone, do not use any non-standard
nano-SIM card cut from a SIM card. You can get a standard
nano-SIM card from your service provider.
1. Open the back cover
2. Slip the nano-SIM card into the slot.
3. Align the golden contacts in the battery compartment with the
battery contacts and push the battery down.
4. Slip the microSD card (sold separately) into the card holder.
5. Replace the back cover.
Charging the Battery
Your phone’s battery should have enough power for the phone to
turn on, find a signal, and make a few calls. You should fully
charge the battery as soon as possible.
WARNING!
Use only ZTE-approved chargers and cables. The use of
To Next Page
Loading...
Need help?
General
