Zte ZPAD 10 User Manual

5
Charging the Battery
Your new tablet’s battery should have enough power for the device
to turn on and find a signal. You should fully charge the battery as
soon as possible.
WARNING!
Use only ZTE-approved chargers and USB cables. The use of
unapproved accessories could damage your device or cause the
battery to explode.
WARNING!
Do not remove the back cover. The battery is not removable.
Removal may cause fire or explosion.
1. Connect the adapter to the charging jack.
2. Connect the charger to a standard AC power outlet.
3. Disconnect the charger when the battery is fully charged.
NOTE:
If the battery is extremely low, you may be unable to power on the
tablet even when it is being charged. In this case, try again after
charging for at least 20 minutes. Contact customer service if you still
cannot power on the tablet after prolonged charging.
Powering On/Off
 Press and hold the Power key to turn on your tablet.
 To turn it off, press and hold the Power key to open the options
menu and touch
> .
NOTE:
If the device freezes or takes too long to respond, try pressing and
holding the Power key for about 10 seconds to restart the device.

Zte ZPAD 10 Specifications

General

Brand	Zte
Model	ZPAD 10
Category	Tablet
Language	English