ZXHN H168N User’s Manual
13
Interface Function
LAN1-LAN4
RJ-45 port: It is used to connect the modem to other
network devices.
Reset
During power ON period, hold on this button for more
than 5 seconds to reset the current settings to the
factory default setting, and then the system restarts
automatically.
WLAN WLAN switch, to turn on / off the WLAN.
WPS WLAN Protected Setup.
Power Power supply port: It is connected to the power adapter
On/Off Power switch, to power on or power off the device.
3.2 Hardware Connection
To Next Page
Loading...
Need help?
General
