ZXMSG 5200 (V2.0) Technical Manual
22 Confidential and Proprietary Information of ZTE CORPORATION
Hardware Structure
Figure 2 illustrates the hardware structure of the ZXMSG 5200.
F
IGU R E
2
ZXMSG
5200
H
ARD WARE
S
T R U C T U RE
ICS
ICS
LC0 LC1 ... LC9 TSLC
2M Hw
8K,2M,4M Clock
100M Ethernet
LC0 LC1 ... LC9 TSLC
ICS
2M Hw
8K,2M,4M Clock
100M Ethernet
LC10 LC11
MPR MPR
Ethernet
2*8MHw
2*100M
1*8MHw 1*100M
ICS
CNIC
2*100M, 1GE
Control unit (shelf)
Subscriber unit (shelf)
LC: Line Card, including narrowband line card and broadband line card
SLC: Test Subscriber Line Card ICS: Integrated Control and Switch Board
MPR: Packet processing and resource board CNIC: Network address conversion module
The ZXMSG 5200 hardware system consists of a control unit and a
subscriber unit. The control unit can implement all system functions. The
service access expansion unit is used to implement expansion to serve
more subscribers.
Refer to Chapter 4, Hardware Structure for functions of units and boards.
To Next Page
Loading...
Need help?
General
