2.
REDIAL: To redial the last dialed phone number.
• Take Handset off-hook
or press the SPEAKER button
or press an available LINE key to activate speakerphone
or on idle screen
• Press the REDIAL soft-key
3. VIA CALL HISTORY: To call a phone number in the phone’s history.
• Press the MENU button to bring up the Main Menu.
• Select Call History and then “Answered Calls”, “Missed Calls” or
“Dialed Calls” or etc depending on your needs
• Select phone number using the arrow keys
• Press OK to select
• Select and press “Dial” to dial out
4.
VIA PHONEBOOK: To Call a phone in from the phone’s phonebook.
• Go to the phonebook by pressing the DOWN arrow key or
pressing the menu button and selecting “Phone Book”
• Select the phone number by using the arrow keys
•Press OK to select
• Select and press “Dial” to dial out
5.
VIA PAGE/INTERCOM: Server/PBX has to support Page/Intercom. Also,
ZXV10 P802L and PBX have to be configured correctly.
•Take Handset off hook
or press SPEAKER button
or press HEADSET button
or press an available LINE key to activate speakerphone
• Press OK and the screen will display “LINEx: PAGE”
• Dial the number to Page/Intercom
• Press “SEND” button to dial out
NOTE:
Dial-tone and dialed number display occurs after the handset is off-hook, or
handset button is pressed, or speaker button is pressed, or the line key is
selected. After dialing the number, the phone waits 4 seconds (by default; No
key Entry Timeout) before sending and initiating the call. Press “#” button to
override the 4 second delay.
To Next Page
Loading...
General