settings.
Layer 2 QoS
Configure 802.1Q/VLAN Tag and priority value.
Factory
Functions
Press Menu to display the factory function items including
Audio Loopback
Speak into the handset. If you hear your voice in the
handset, your audio
is working fine. Press Menu button to exit the mode.
Diagnostic Mode
All LEDs will light up.
Press any key on the keypad, to display the button name in
the LCD. Lift and put back the handset or press Menu button
to exit the diagnostic mode.
Press ‘←’ to return the main menu
Network
To select IP mode (DHCP/Static IP/PPPoE); to setup PPPoE,
IP address, Netmask, Gateway address and DNS Server 1
and DNS Server 2.
Call
Features
To enable/disable and configure Forward All, Forward Busy,
Forward No Answer, No Answer Timeout, select Call Features
and press Account 1 to set the forward call features.
Reboot Select on Reboot and press Menu button to reboot the device.
Exit Exit from this menu.
Configuration VIA Web Browser
The ZXV10 P802L embedded Web server responds to HTTP/HTTPS
GET/POST requests. Embedded HTML pages allow a user to configure the IP
phone through a Web browser such as Microsoft’s IE, Mozilla Firefox and
Google Chrome.
Access the Web Configuration Menu
To Next Page
Loading...
General