EasyManua.ls Logo

ZTW Gecko Series - User Manual

ZTW Gecko Series
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
ZTW Gecko Series
Brushless ESC User Manual
Question and Answer IconNeed help?

Do you have a question about the ZTW Gecko Series and is the answer not in the manual?

ZTW Gecko Series Specifications

General IconGeneral
BrandZTW
ModelGecko Series
CategoryControl Unit
LanguageEnglish

Summary

Specification

Features

Lists key features of the ESC, including smooth linearity, motor compatibility, governor mode, and protection features.

Programmable Items

Details the programmable settings available for the ESC, such as brake type, battery type, and motor timing.

Settings - Initial Parameters

Brake Type

Configures brake behavior at minimum throttle, offering options like Off, Soft, Mid, and Hard brake.

Battery Type

Sets the battery chemistry (NiCad/NiMh, LiPo, LiFe) for appropriate low voltage protection.

Cut Off Voltage Threshold

Defines low voltage protection levels for different battery types to prevent over-discharge.

Restore Factory Setup Defaults

Resets all ESC settings to their original factory default values.

Settings - Motor and BEC Configuration

Motor Timing

Adjusts motor timing for optimal ESC efficiency and smoothness, with auto and manual settings.

SBEC Voltage Output

Selects the output voltage for the BEC, supporting 5.0V, 6.0V, 7.4V, and 8.4V.

Governor Mode

Enables or disables governor mode for helicopters, affecting RPM control and start-up behavior.

Settings - Operation Modes

Motor Rotation

Configures the motor's rotation direction (forward or reverse).

Start Up Strength

Sets the initial acceleration strength of the motor, from low to high.

Low Voltage Cut Off Type

Determines how the ESC reacts to low voltage: reduce power or cut off power.

Programming by Transmitter

Entering Programming Mode

Procedure to enter the ESC programming mode using the transmitter.

Selecting Programmable Item

Method for navigating through programmable items using audible tones.

Selecting Desired Value

Process for choosing and setting a specific value for a programmable item.

Disconnecting Battery Pack

Instruction on disconnecting the battery pack after programming.

Tones Sequence

Details the sequence of audible tones indicating programmable items and their values.

ESC Safety Functions

Over-heat Protection

ESC automatically reduces power when temperature exceeds a limit to prevent damage.

Lost Throttle Signal Protection

ESC cuts power to the motor if a lost throttle signal is detected for 2 seconds.

Automatic Throttle Calibration

Powering Up and Calibration

Procedure for initial ESC setup to learn and memorize transmitter throttle signals.

ESC Start Up Procedure

Normal Start Up

Describes the standard procedure for powering up the ESC and motor.

Troubleshooting

Motor Not Working

Addresses issues where the motor does not respond or produce tones.

Motor Runs in Reverse Rotation

Troubleshoots motor running in the incorrect direction.

Motor Stops in Flight

Diagnoses causes for the motor stopping unexpectedly during flight.

Motor Restarts Abnormally; Overheats

Covers intermittent motor restarts and ESC overheating issues.