ASI183 Manual
You can order the holder ring from us or our dealer to mount the cooled camera to tripod.
There is 1/4″ screw under the holder
6.2 Power consumption
ASI cameras are designed to have very low power consumption which is around 300ma@5V.
You only need the USB cable to power up the camera. However, you will need a separate power
supply to activate the cooler. We recommend 12V at 3A or more AC-DC adapter for cooler power
supply (2.1mm*5.5mm, center positive). You may also use a battery supply from 9 to 15V to
power the cooler.
Here is a test result of the cooler power consumption of our cooled camera. It only needs
0.5A to cool the camera to 30℃ below ambient.
To Next Page
Loading...
Need help?
General
