Aastra Dialog 4147 Medium User Manual

29Dialog 4106 Basic/Dialog 4147 Medium
Outgoing Calls
Dial by a function key
Note: For for the Dialog 4147 phone, make sure that the
programming slide switch is set to the “Prog On” position.
See section “Enable/Disable Program key” on page 72.
You can program and activate directory numbers (extensions and
Common Abbreviated Numbers) on the programmable keys. On
the Dialog 4106 you can also store one number on the Message
key. Stored numbers can consist of maximum 21 digits.
u Lift the handset.
Wait for dial tone.
Head Office î Press to make a call (preprogrammed).
Note: To dial a number that is stored on the second level,
press the Message Waiting/2nd key before pressing the
preprogrammed key.
Program
Program a directory number on the programmable keys.
On the Dialog 4106 Basic phone:
The Dialog 4106 has four keys for programming; the three
programmable keys and the Message key.
Notes:
To store a number on the Message key, just press the key
during the following procedure like a normal programmable
key.
If you press an invalid key during programming, the
programming mode will be terminated automatically and
you will hear a special rejection tone.
u Lift the handset.
Wait for dial tone.
¥ Press.
î Press a programmable key.
If a number is already stored, it will be erased automatically.
If you would like to erase a number, store a 0 instead of the
telephone number.

Aastra Dialog 4147 Medium Specifications

General

Brand	Aastra
Model	Dialog 4147 Medium
Category	Telephone
Language	English