261Gx, 261Ax | IM/261Gx/Ax-EN Rev. 08 43
Change from two to one colu mn
9.5 Mounting dimensions
(not design data) - dimensions in mm (inch)
9.5.1 Standard version
Fig. 24: Dimensions — standard design
1 Electrical connection | 2 Housing cover | 3 Name plate | 4 Filter for atmospheric compensation | 5 Tag (optional) |
6 Process connection | 7 Grounding/equipotential bonding terminal (optional)
1) Clearance for cover removal required
2) With LCD indicator
3) Dimensions for sensor code C, F
Dimension "A" is dependent on the process connection as per the following table:
Process connection Dimension "A" in mm (inch)
1/2-14 NPT male thread 111 (4.37)
1/2-14 NPT female thread 106 ( 4.17 ) / (110 (4.33) sensor V)
DIN EN 837-1 G 1/2 B 111 (4.37)
DIN EN 837-1 G 1/2 B ( HP ) for connections with convex seal 121 (4.76)
M10684-01
12
4
5
3
6
7
Ø 60 (2.36)
15 (0.59)
1)
8 (0.31)
2)
36 (1.42)
A
Ø 21 (0.83)
64 (2.52)
Ø 28 (1.1)
3)
To Next Page
Loading...
Need help?
General
