70 Start-up and control panel
ACH550-01 User's Manual
2. Start-up by changing the parameters individually
To change the parameters, follow these steps:
To complete the control connections by manually entering the
parameters, see chapter Parameter listing and descriptions.
1 Press MENU to go to the
main menu.
2 Select PARAMETERS with
the UP/DOWN keys and
press ENTER
to go to the
Parameters mode.
3 Select the appropriate
parameter group with the
UP/DOWN keys and press
SEL.
4 Select the appropriate
parameter in a group with
the UP/DOWN keys. Press
EDIT to change the
parameter value.
5 Press the UP/DOWN keys
to change the parameter
value.
6 Press SAVE to store the
modified value or press
CANCEL to leave the set
mode. Any modifications
not saved are cancelled.
7 Press EXIT to return to the
listing of parameter groups,
and again to return to the
main menu.
To Next Page
Loading...
Need help?
General
