To Next Page

To Previous Page

Installation

For information about how to mount and install the equipment, follow

the instructions in the Installation Guide at the end of this manual.

E Warning – Working with high voltage is potentially lethal. Per-

sons subjected to high voltage may suffer cardiac arrest, burn

injuries, or other severe injuries. To avoid such injuries, make

sure to disconnect the power supply before you start the instal-

lation.

Electrical equipment should only be installed, accessed, ser-

viced and maintained by qualified electrical personnel.

E Warning – For safety reasons it is recommended that the

equipment is installed in a way that makes it impossible to

reach or touch the terminal blocks by accident.

Immunity conducted 2kHz - 150kHz

150kHz – 80MHz ( IEC 61000-4-6 )

RF Emission EN 55022, class B (CISPR22)

ESD 15 kV ( IEC 61000-4-2 )

Standards IEC 62052-11, IEC 62053-21 class 1 & 2,

IEX 62053-23 class 2, IEC 62054-21, GB/T

17215.211-2006, GB/T 17215.321-2008

class 1 & 2, GB/T 17215.322-2008 class

0.5 S, GB 4208-2008, EN 50470-1, EN

50470-3 category A, B

Tech. Data

B21_install.book Page 7 Thursday, May 30, 2013 4:29 PM

ABB B21 User Manual

Other manuals for ABB B21