7
EN
EN
Installation
For information about how to mount and install the equipment, follow
the instructions in the Installation Guide at the end of this manual.
E Warning – Working with high voltage is potentially lethal. Per-
sons subjected to high voltage may suffer cardiac arrest, burn
injuries, or other severe injuries. To avoid such injuries, make
sure to disconnect the power supply before you start the instal-
lation.
Fast trans. burn test 4 kV ( IEC 61000-4-4 )
Immunity HF-fields 80 MHz - 2 GHz at 10 V/m (IEC61000-4-3)
Immunity conducted 2 kHz - 150 kHz
150 kHz – 80 MHz ( IEC 61000-4-6 )
RF Emission EN 55022, class B (CISPR22)
ESD 15 kV ( IEC 61000-4-2 )
Standards IEC 62052-11, IEC 62053-21,
IEC 62053-22, IEC 62053-23, GB/T
17215.211-2006, GB/T 17215.321-
2008,GB/T 17215.322-2008, GB 4208-
2008, EN 50470-1, EN 50470-3 category
A,B & C
Accuracy class Class 1 & class 2 Class 0,5 S &
class 2
Technical Data Direct conn. Indirect conn.
B23_B24_install.book Page 7 Thursday, May 30, 2013 4:01 PM
To Next Page
Loading...
Need help?
General
