22
7 Cleaning faceplates
The equipment must be cleaned only with a soft cloth and neutral soap product. Do not use solvents.
Cleaning faceplates / Getting started
8 Getting started
CP600-eCo control panels must be programmed with the software PB610-B. PB610 Panel Builder 600
is a software tool that must be properly installed on a computer running Microsoft Windows.
There are two options to transfer a PB610-B application project to a CP600 device:
Ethernet Connect the CP600 device to the computer with an Ethernet network connection.
From PB610 Panel Builder choose the command Run/Download to target. You may
have to ensure that the proper rewall policy has been congured in the computer to
allow PB610 Panel Builder to access the network.
USB Create an Update Package using PB610 Panel Builder and copy it to a USB Flash
drive.
To Next Page
Loading...
Need help?
General
