23
9 System settings
CP600-eCo control panels have a system settings interface to allow conguration of system options.
System settings
The user interface of System Settings is based on HTML pages accessible locally on CP600 or in
remote using a Web browser Chrome v44 or higher on port 443 (https://IP/machine_cong). Default
username is “admin”, default password is “admin”. Use navigation menu on the left side of the screen
to browse through the available options.
The active item of menu is highlighted on the left side. The right side shows related information and
settings. Based on the size of the CP600 screen, both menu and content of selected item may be
shown on screen or not.
System Settings has two modes of operation:
User Mode PB610-B runtime is running or the CP600 device is in “factory default” status.
System Mode PB610-B runtime is not running or the CP600 device has a software failure.
System Mode includes all options available in User Mode and oers in additions
commands dedicated to system upgrade and recovery not availables when running in
User Mode.
To Next Page
Loading...
Need help?
General
