To Next Page

To Previous Page

—

Overview





Highlighted features

• 

 

 

 

 PSE, PST

• 

to Ethernet.

• 

 Give control commands to the device (Start, Stop, Auto, etc.). The meaning of the commands depends on the connected

device

 Read status information and actual values from the device

 Change parameter values

 Read maintenance counters

 Reset a trip

• 

• Up to four masters can concurrently access the connected devices. The master connections can be supervised.

• Access via Modbus TCP can be restricted to a limited set of IP addresses

• 

dancy in case of a single failure.

• 

• 



this document.

Document history

  Supplementation of table values and supported bit rate

 various Update of images, LLDP information added

 various New template, corrections

6 UNIVERSAL MOTOR CONTROLLER UMC100.3 | MTQ22-FBP.0 MODBUS TCP MANUAL

ABB MTQ22-FBP.0 User Manual

Questions and Answers: