Section-10
04-3004_S10_TDS_ABB_POWERSCALE_10-50 kVA_EN_150113.doc Page 12/20 ABB
Printed in Switzerland – Modifications reserved
10.9 OPTIONS
- SNMP card and WaveMon Management Software , Modbus Protocol, USB
- External Battery Cabinets
- Parallel kit
- In/output Transformer for special voltages
- Back-feed protection
- Temp. sensor for battery temp. control
- Relays and USB card
10.9.1 SNMP card / WaveMon Management Software
The Simple Network Management Protocol (SNMP) is a worldwide-standardized communication-protocol. It is used
to monitor any device in the network via simple control language. The UPS-Management Software WaveMon also
provides its data in this SNMP format with its internal software agent. The operating system you are using must
support the SNMP protocol. We offer our WaveMon software with SNMP functionality for Novell, OS/2, all Windows
running on INTEL and ALPHA, DEC VMS, Apple.
Two types of SNMP interfaces with identical functionality are available: an external SNMP-Adapter (Box) and an
internal SNMP-Card. Both can manage a parallel system (N modules) and return either global values - which are
consistent for the whole parallel system - or specific values from the single modules.
Internal SNMP-Card
Internal SNMP-Card
External SNMP-Adapter
External SNMP-Ad
Concept
power
DPA
TM
Techni
cal
Specifi
cations
pter
To Next Page
Loading...
Need help?
General