ABB PowerValue 11 RT G2 User Manual

ESC
Online mode
Battery mode Bypass mode
Fault
Escape Up Down Enter On/Off
Battery Load
20
Min
100
%
Output
230 50
V
Hz
LED’s
Selection
keys
LCD
20
ABB UPS PRODUCTS AND SOLUTIONS
—
4 Operation
The user-friendly control panel has two parts:
• Selection keys
• Power management LCD (PMD)
• Status LEDs
—
4.1 Control panel
This chapter describes how the UPS is operated
through the LCD.
The user can:
• Operate the LCD
• Start up and shut down the UPS (excluding the
commissioning start up)
• Operate additional SNMP adapters and their software
—
20 Control panel
4.1.1 Selection keys
—
Table 5: UPS selection keys
Button Function Illustration
Power
ON/OFF
Turn the UPS on
and off or change
operating mode.
Scroll UP
Scroll up
through the menu.
Scroll DOWN
Scroll down
through the menu.
Select / Edit
Select and
confirm settings.
Exit / Mute
Exit menus and
mute the buzzer.
4.1.2 LED’s status indicators
—
Table 6: UPS selection keys
Indicator Status Description
NORMAL
(GREEN)
ON
The UPS is operating
normally on online or on
high efficiency mode.
BATTERY
(ORANGE)
ON
The UPS is in battery mode.
BYPASS
(ORANGE)
ON
The UPS is in bypass mode.
Flash The UPS is in standby mode.
FAULT
(RED)
ON
The UPS has an
active alarm or fault.
—
20

ABB PowerValue 11 RT G2 Specifications

General

Brand	ABB
Model	PowerValue 11 RT G2
Category	UPS
Language	English