26. Tools
The protection relay is delivered as a preconfigured
unit. The default parameter setting values can be
changed from the frontpanel user interface (local
HMI), the Web browser-based user interface (Web
HMI) or Protection and Control IED Manager
PCM600 in combination with the relay-specific con-
nectivity package.
PCM600 offers extensive relay configuration func-
tions. For example, depending on the protection
relay, the relay signals, application, graphical dis-
play and single-line diagram, and IEC 61850 com-
-
cation, can be modified with PCM600.
When the Web HMI is used, the protection relay can
be accessed either locally or remotely using a Web
browser (Internet Explorer). For security reasons,
the Web HMI is disabled by default but it can be en-
abled via the local HMI. The Web HMI functionality
can be limited to read-only access.
The relay connectivity package is a collection of
software and specific relay information, which en-
ables system products and tools to connect and in-
teract with the protection relay. The connectivity
packages reduce the risk of errors in system inte-
gration, minimizing device configuration and setup
times. Further, the connectivity packages for pro-
tection relays of this product series include a flexi-
ble update tool for adding one additional local HMI
language to the protection relay. The update tool is
activated using PCM600, and it enables multiple
updates of the additional HMI language, thus offer-
ing flexible means for possible future language up-
dates.
68 REF615 ANSI 5.0 FP1 FEEDER PROTECTION AND CONTROL
—
Table 117. Tools
Description Version
Web browser
To Next Page
Loading...
Need help?
General
