Communication
67
Message Router, Class 0x02
Services
Assembly Objects, Class 0x04
The Assembly Objects binds attributes of multiple object together.
This allows data of the objects to be sent and received over a
single connection. Assembly objects can be used to bind input
data or output data. The terms “input” and “output” are defined
from the network’s point of view. An input will produce data to the
network and an output will consume data received from the
network.
Services
Class Attributes
Instance Attributes
Instances are presented above in Communication - Assembly
objects.
Class services: –
Instance services: –
Class services: Get Attribute Single
Instance services: Get Attribute Single
Set Attribute Single
# Name Services Description Dflt,Min,Max Data type
0x01 Revision Get Revision 2 0x0002 UINT
# Name Services Description Dflt,Min,Max Data type
0x03 Data Get / Set Data produced /
consumed by
module
N/A, N/A, N/A Array
[BYTE]
To Next Page
Loading...
Need help?
General
