TERRA DC WALLBOX
2022-11-15 17/20
4. Operator Instructions
4.1. Cleaning of the Terra DC Wallbox
Clean the DC Wallbox Cabinet once a year (during yearly maintenance) in the following way:
• Remove rough dirt by spraying with low-pressure tap water.
• Remove dirt by hand with a cloth rag.
• Rinse thoroughly with tap water.
• Optionally, apply wax on the front for extra protection and gloss.
• Do a check on the overall enclosure and on the frontal cover for cracks or other damages.
Ordinary cleaning
Keep the air inlets clean and free from snow and leaves or from
any other materials.
Rust forming
When the charger is placed in a corrosion sensitive environment,
the forming of superficial rust is possible on the welding points.
This rust is merely visual, there is no risk for the cabinet’s integ-
rity. The rust can be removed with the cleaning procedure de-
scribed above. To prevent the rust from reappearing; prime the
areas with a transparent or color-like priming finish (separate
Service Instructions are available).
When the Terra DC Wallbox Charger is exposed to rain, it is
sufficient to clean it twice a year.
Do not apply high-pressure water jets. Water may leak into
the cabinet. If a high-pressure water jet has been used,
make sure that the inside of the cabinet is dry.
- Only use cleaning agents with a pH value between 6 and
8.
- Do not use cleaning agents with abrasive components.
- Do not use abrasive tools.
To Next Page
Loading...
Need help?
General
