To Next Page

To Previous Page

Operation Manual / TPL69-A10 / -A30 ... TPL77-A10 / -A30

8 Disassembly and assembly / 8.1 Introduction

8 Disassembly and assembly

8.1 Introduction

CAUTION

Further work

Further tasks, which are not described here, may be carried out only by

trained personnel from an ABB Turbocharging service station.

u Only carry out those tasks that are described in this chapter.

u Mark the casing position for assembly.

Identifying assembly devices

Not all assembly devices are marked with a part number. They can be

identified using the tool list. This list is enclosed in the toolbox.

WARNING

Maintaining assembly devices

Assembly devices must be checked for damage before and after use.

u Visually check for corrosion, cracks, deformation and wear.

u Don't use damaged assembly devices, but replace them.

Customer spare parts set

Before beginning work, ensure that the required customer spare parts

sets are available.

u See chapter Spare parts.

Page 82 / 136

ABB TPL69-A30 User Manual

Questions and Answers: